2024 Kaufman Trailers 15,000 GVWR / 22 ft. Wood Floor Base

Information

2024 Kaufman Trailers 15,000 GVWR / 22 ft. Wood Floor

Our 15,000 GVWR wood floor tilt car trailers are manufactured with a 6" channel frame and tongue, and 6×2 heavy wall tubing on the full length tilting bed, with 3" channel cross members on 16" centers. The entire bed tilts for loading and is built with all tubing steel perimeter frame construction. 24" toe plates and the gradual loading angle, made possible by a total bed length (including toe plates) of 24', make it possible to load vehicles or equipment with low clearance that will not load on standard ramp and dovetail trailers. A hydraulic damper cushions the lowering of the bed during loading. There is a convenient one-handle latch system to secure the bed in the towing position once loading is complete. Additional standard features on this high quality car trailer include a 12k drop foot jack, diamond plate fenders, four-wheel brakes, radial tires, stake pockets with rub rail, and a sealed modular wiring harness with lifetime LED lights.

Photos

Highlights

  • Farmington, Maine
  • 2024
  • Kaufman Trailers
  • 15,000 GVWR / 22 ft. Wood Floor Base
  • 6 in. x 2 in. heavy wall tubing
  • Available
  • Deck: 82 in. Between fenders

Specifications

  • 2024
  • Kaufman Trailers
  • 15,000 GVWR / 22 ft. Wood Floor
  • Base
  • Tilt
  • Dovetail: 24 in. toeplates
  • Deck: 22 ft + 24 in. toeplates (with hydraulic damper cylinder)
  • Deck: 82 in. Between fenders
  • HD cast adjustable ball coupler or pintle ring
  • 15,000 lb.
  • 2-5,200 lb. e-z lube axles
  • Sealed modular wiring harness with LED lights
  • 6 in. x 2 in. heavy wall tubing
  • 6 in. Channel
  • 2
  • 235/80 R16 LRE (3,520 lb.)
  • Silver or white mod (Based on stock)
  • Heavy duty safety chains
  • Fenders: diamond plate fenders | Jack: 2,000 lb. Swing up jack | Tailgate: 5 ft. Heavy duty spring assist split gate (Capacity 12k piece of equipment). Made with 4 in. channel gate frame runners.| Tie Downs: Stake pockets and Rubrail | Ramps: 60 in. x 14 in. slide in ramps, with diamond surface | Tongue: 6 in. Channel | Floor: Full diamond plate with 3 in. channel crossmembers 16 in. oncenter
  • Floors: 2 in. Treated wood floor, with 3 in. channel crossmembers 16 in. oncenter | Finish: Primed, 2 coats of automotive grade enamel, pin striped
  • Double eye springs
  • Both braking axles, Standard