2024 Kaufman Trailers 10,000 GVWR / 20 ft. Diamond Floor Base

Information

2024 Kaufman Trailers 10,000 GVWR / 20 ft. Diamond Floor

Our diamond floor tilt car trailers are manufactured with a rigid 5" channel frame and tongue. The 10,000 GVWR model adds 5.2K axles with 225/75 R15 LRD radial tires. The entire bed tilts for loading and is built with all tubing steel construction. 24" toe plates and the gradual loading angle, made possible by a total bed length (with toe plates) of 22', make it possible to load sports cars with low clearance that will not load on standard ramp and dovetail car trailers. A hydraulic damper cushions the lowering of the bed during loading. Standard features on this high quality tilt trailer include a swing up jack, heavy duty diamond plate fenders, four-wheel brakes, radial tires, stake pockets with rub rail, and a sealed modular wiring harness with lifetime LED lights.

Photos

Highlights

  • Farmington, Maine
  • 2024
  • Kaufman Trailers
  • 10,000 GVWR / 20 ft. Diamond Floor Base
  • 6 in. x 2 in. tubing frame on tilting bed
  • Available
  • Deck: 82 in. Between fenders
  • Deck: 22 in

Specifications

  • 2024
  • Kaufman Trailers
  • 10,000 GVWR / 20 ft. Diamond Floor
  • Base
  • Tilt
  • Dovetail: 24 in. toeplates
  • Deck: 19 ft. 8 in. + 28 in. toeplates (with hydraulic damper cylinder)
  • Deck: 22 in
  • Deck: 82 in. Between fenders
  • 2-5/16 in. Adjustable coupler
  • 10,000 lb.
  • 2-5,200 lb. e-z lube axles
  • Sealed modular wiring harness with LED lights
  • 6 in. x 2 in. tubing frame on tilting bed
  • 5 in. Channel
  • 2
  • 225/75 R15 (2600 lb.) Radial
  • Silver or white mod (Based on stock)
  • Heavy duty safety chains
  • Fenders: Heavy duty diamond plate fenders (6IN. HIGH OVER DECK) | Jack: 2,000 lb. Swing up jack | Tailgate: 5 ft. Heavy duty spring assist split gate (Capacity 12k piece of equipment). Made with 4 in. channel gate frame runners.| Tie Downs: Stake pockets and Rubrail | Ramps: 60 in. x 14 in. slide in ramps, with diamond surface | Tongue: 5 in. Channel | Floor: Full diamond plate with 3 in. channel crossmembers 16 in. oncenter
  • Floors: Full diamond plate with 3 in. channel crossmembers 24 in. oncenter | Finish: Primed, 2 coats of automotive grade enamel, pin striped
  • Double eye springs
  • Both braking axles, Standard